Is it possible to activate dnc software on old cnc sinumerik 3M or fanuk6M???
By: Support
Posted on: Oct 5 2007 at 08:44:54 AM
I don`t know of any reason why it shouldn`t work with either of those machines
On a Sinumerik 3M set the following parameters on the machine
411 = 11101111
412 = 11101111
416 Bit 7 = 1 and Bit 0 = 1
On a Fanuc 6M set the following parameters on the machine
InputDevice 1 = 1
InputDevice 2 = 1
Input Unit = 0
TV Check = 0
PARAM
340 = 2
341 = 2
In each case we got this information from users who have successfully used easyDnc with these machines.
Those settings are to set up the machine - To set up easyDnc take a look at easyDnc`s Auto/PortScan option (Right click the CNC icon and select `PortScan`)
Reply - add a comment to this topic.
You may enter letters, numbers and standard punctuation only. HTML and other scripts/tags will be rejected.
